Corrotech / Products / Application technologies / Inspection of the execution and quality of the coating / TROTEC® T260 infrared thermohygrometer

TROTEC® T260 infrared thermohygrometer

Product Number

CT3510207250

Detailed description

With three operating modes and a variety of measurement functions (all selectable with just one hand on the touchscreen), the TROTEC® T260 infrared thermohygrometer is a mobile measuring station that fits in your vest pocket. The measuring instrument corresponds in TH mode to the T210 and provides the same functions as this thermohygrometer. In IC mode, the T260 can be used as a laser pyrometer to measure surface temperature with measurement point marking. The measured surface temperature is then continuously displayed in real time on the upper indication of the measured values on the display. In DP mode, the dew point and surface temperature are displayed simultaneously on the easy-to-read touch screen. If the wall temperature is close to or below the dew point temperature, the T260 will trigger an alarm with an optical laser signal and a warning tone. With the alarm function, wall surfaces can be tested in a very short time and weak spots can be detected quickly.

The alarm thresholds can be individually configured. You can connect the T260 infrared thermohygrometer to a PC using a USB cable. With the optionally available MultiMeasure Studio software (free in the service/download area of trotec.de), you can transfer the T260 measurement data online and in real time directly to a PC and save it for later analysis or reports.

Features:

measuring instrument, developed and manufactured in Germany to the highest quality standards
design in durable and high-value two-component construction with IP54 protection type
easy to clean overall glass surface made of special Blanview glass
capacitive touch control panel
high-resolution colour display for simultaneous display of two readings
pyrometer function for accurate surface temperature measurement
dew point alarm function
accurate temperature and humidity measurement - local altitude or pressure can be configured
integrated calibration function (user offset) allows long-term use
Storage function of measured values via USB in case of active software connection
including the MultiMeasure Studio measurement management software (standard download version)

For more information about TROTEC® products, please visit www.trotec.com.

Technical data

Manufacturer: TROTEC

Air temperature measurement range: -20 °C to +50 °C

Humidity measurement range: 0 - 100% RH

Surface temperature measurement range: -70°C to +380°C

Resolution of air temperature measurement: 0,1°C

Resolution of humidity measurement: 0.1% RH

Resolution of surface temperature measurement: 0,1°C

Data interface: USB

Operating ambient temperature: -20 °C to 50 °C

Power supply: 4x AA 1.5 VDC