PosiTector® PosiTest Banana gauge magnetic peel probe for measuring coating thickness for non-magnetic coatings on steel. Non-destructive measurement of non-magnetic coatings (paints, enamels, electroplating, metallization, plating, etc.) on steel. Highly wear-resistant carbide probe for longest life and consistent accuracy. Extra robust housing that will not be damaged by mechanical shock, water, acids or solvents. Unique overall design, fully supported, good positioning, no tendency to rotate during measurement. Visual and audible indicators that indicate when the thickness value is set. "V" grooves in the probe housing and meter base allow for proper positioning on cylindrical objects. Included is a calibration certificate (long form) showing continuity with the PTB.
For more information about DEFELSKO® products, please visit www.defelsko.com.
Variants of the magnetic tear-off probe:
PosiTector® PosiTest FM Magnetic Tear Probe
For: hot dip galvanizing, hard chrome plating, paint, enamel, plastic coatings on steel
Measuring range: 0 - 80 mils
Measurement accuracy: ±0.2 mils to 4 mils; ±5% over 4 mils
PosiTector® PosiTest F Magnetic Tear Probe
For: hot dip galvanizing, hard chrome plating, paint, enamel, plastic coatings on steel
Measuring range: 0 - 2000 µm
Measurement accuracy: ±5 µm to 100 µm; ±5% over 100 µm
PosiTector® PosiTest GM Magnetic Tear Probe
Designed for: electroplating, thin paint films, phosphating on steel
Measuring range: 0 - 8 mils
Measurement accuracy: ±0.04 mils to 0.8 mils; ±5% over 0.8 mils
PosiTector®PosiTest G Magnetic Peel Probe
Designed for: electroplating, thin paint films, phosphating on steel
Measuring range: 0 - 200 µm
Measurement accuracy: ±1 µm to 20 µm; ±5% over 20 µm
