Corrotech / Products / Compressed air technology / Compressed air treatment equipment / Compressed air chiller GRITCO® AFTER COOLER – from 3 to 10 m³/min

Compressed air chiller GRITCO® AFTER COOLER – from 3 to 10 m³/min

Product Number
CTGRAFT0310
For trouble-free blasting, the compressed air must be as dry as possible. The GRITCO® AFTER COOLER range of aftercoolers is designed to provide the best possible compressed air for small, medium or large blast systems. To prevent clogging of the blast vessel, ensure a smooth, continuous flow of abrasive with less disturbance and wear by using an aftercooler. Detail description
Recommended
Rental

For trouble-free blasting, the compressed air must be as dry as possible. The GRITCO® AFTER COOLER range of aftercoolers is designed to provide the best possible compressed air for small, medium or large blasting systems. To prevent clogging of the blast vessel, ensure a smooth, continuous flow of abrasive with less disturbance and wear by using an aftercooler. The compressed air needs to be cooled (approximately 9 °C above ambient temperature). This drop in temperature causes the water to condense and form droplets. These droplets are removed by the centrifugal separator of the aftercooler. For even better clean air results, optional compressed air filters can be fitted to remove oil and other contaminants.

The cooler is equipped with an air motor for easy use anywhere. For stationary use or to save compressed air, a 240 V electric motor is available. Connection to the compressor battery is possible with a 12 V DC motor on smaller models.

Features:

  • easy handling and installation
  • quick setup in less than a minute
  • easy-to-use and accessible drainage system
  • optional automatic drainage
  • trouble-free blasting due to 80 - 85% moisture removal
  • minimal pressure drops through large pipes
  • best possible performance at low energy costs thanks to optimal fan design
  • wide selection of (optional) oil and retention filters
  • high quality heat exchanger with copper tubes and aluminium fins
  • cooling fins protected by a grille
  • Durable powder coat finish

For more information about GRITCO® products, please visit www.gritco.com.

Manufacturer: Gritco
Capacity (compressed air): from 3 to 10 m³/min

CORROTECH NEWS

Every month we send news from the world of surface treatments to your email inboxes. Subscribe to make sure you don't miss a thing.